Minoura MoZ-Roller Manual do Utilizador descarregar pdf

VERGO TF-1

instructions manual

(ver.1.1 2015/5)

●VERGO-TF is a an in-vehicle bike mounting base and should not be used for any other purpose.

●For normal 2-wheel bike only. Not suitable for heavy electric, downhill or tandem bikes.

●Standard 9mm quick release skewer and 15mm thru type axle can be used on VERGO-TF. 20mm thru axle for

downhill bike cannot be mounted. A plain front fork for standard nut type axle is compatible.

●When using 9mm quick release skewer, use the supplied skewer. When using 15mm thru type axle, remove the

sleeves from the Fork Mount and use your own axle.

●The Fork Mount in the kit is for the standard 100mm width hub only. Any other sizes cannot be mounted.

●Drive carefully when transporting bikes with the VERGO-TF. Do not x bikes to the oor and be careful when

accelerating, braking or driving recklessly. Your bikes and vehicle may sustain damage so we recommend you tie

the bikes down with a strap.

●When closing the back gate door, make sure the bike will not hit the rear window.

●

TF-1 has much shorter Rail Bar that means the total stability of TF-1 is much weaker than other versions. You must use a tie-

down belt to hold the bike securely. Don't leave just put on the oor.

Warranty Period : 1 year

For more details, read the attached

Minoura Limited Warranty Policy

card.

Please refer to our website for any

updated information.

[ In-Use Style ]

Important Notes

Contact

If you have any questions or need help, you should contact the dealer where you purchased or the

Minoura distributor in your country rst. Only when you cannot get enough service, you can contact us.

MINOURA JAPAN

(for ALL customers)

MINOURA North America

(for U.S. residents ONLY)

1197-1 Godo, Anpachi, Gifu 503-2305 Japan California, U.S.A.

Phone: +81-584-27-3131 / Fax: +81-584-27-7505 Phone: 1-510-538-8599 / Fax: 1-510-538-5899

Email: [email protected] / Web: www.minoura.jp

Email: [email protected]

Made in Japan

1 2 3 4

Resumo do Conteúdo

Página 1 - VERGO TF-1

VERGO TF-1 instructions manual(ver.1.1 2015/5)●VERGO-TF is a an in-vehicle bike mounting base and should not be used for any other purpose.●For normal

Página 2 - How To Use VERGO-TF

- 2 -1!SchematicsEnd Base (Gray)Knob BoltT-slot NutPlate NutRail Bar (615mm)Knob Dial (Red)Fork Mount (White)Fork Mount Base (Gray)Quick Release Skewe

Página 3 - Remove all skewer, sleeve

2- 3 -! !!!The front fork mount fits both the standard 9mm quick release skewer and the 15mm thru type axle by changing the parts construction.[ Front

Página 4 - Options Wheel Holder

- 4 -3!The optional "VERGO-TF-Stand" cannot be used with TF-1 because the Rail Bar length of TF-1 is too short to mount a bike.Set the white